Scheme Construction Products

Construction and Building Material

Our JAS-ANZ accredited CertMark Product Certification scheme is classed as a Type 5 certification scheme.

This Scheme is a voluntary system of accreditation, and is our most flexible scheme, which can be adapted to the majority of products, covering Australia, New Zealand and many other countries around the globe. Our CertMark Product Certification has been developed to show product compliance to a specific standards such as AS/NZS, AS, NZS, NFPA, ASTM and ISO.

Our CertMark Product Certification can show compliance to a national, regional or international standard, based on the supply of test reports from recognised testing laboratory such as, NATA, IANZ or ILAC approved laboratories and testing facilities, manufacturing site audits, technical documentation, Product Quality Plan (PQP) and on-going annual audits.

It is a highly respected and recognised Product Certification service that meets all the requirements for third parties product accreditation in line with the requirements of ISO 17065, and complies with Australian, New Zealand and International Standards.

See the below list of our construction Standards.

JAS-ANZ Accredited

We have over 400 products that have now been listed as under our JAS-ANZ Accreditation scope.
You can view our full range of JAS-ANZ accredited standards on the JAS-ANZ website.

Construction Standards

  • ANSI Z97.1 Safety Glazing Materials Used In Buildings – Safety Performance Specifications And Methods Of Test
  • AS 1288 Glass in buildings – Selection and installation
  • AS 1316 Masonry cement (JAS-ANZ)
  • AS 1476 Metric wood screws
  • AS 1657 Fixed platforms, walkways, stairways and ladders – Design, construction and installation
  • AS 1672.1 Limes and limestones – Limes for building (JAS-ANZ)
  • AS 1725.1 Chain link fabric fencing Security fences and gates – General requirements
  • AS 1905.1 Components for the protection of openings in fire-resistant walls Fire-resistant doorsets
  • AS 2049 Roof Tiles (JAS-ANZ)
  • AS 2369.1 Materials for solar collectors for swimming pool heating Rubber materials
  • AS 2688 Timber doors
  • AS 2689 Timber doorsets
  • AS 2858 Timber – Softwood – Visually stress-graded for structural purposes
  • AS 3582.1 Supplementary cementitious materials for use with portland and blended cement – Fly ash (JAS-ANZ)
  • AS 3582.2 Supplementary cementitious materials for use with portland and blended cement – Slag – Ground granulated iron blast-furnace (JAS-ANZ)
  • AS 3610 Formwork for concrete
  • AS 3634 Solar heating systems for swimming pools
  • AS 3648 Specification and methods of test for packaged concrete mixes (JAS-ANZ)
  • AS 3715 Metal finishing – Thermoset powder coating for architectural applications of aluminium and aluminium alloys (JAS-ANZ)
  • AS 3850.2 Prefabricated concrete elements Building construction
  • AS 3972 General purpose and blended cements (JAS-ANZ)
  • AS 3996 Access covers and grates
  • AS 4084 Steel storage racking
  • AS 4123.1 Mobile waste containers Containers with two wheels and a capacity up to 400 L for lifting devices – Dimensions and design
  • AS 4123.2 Mobile waste containers Containers with four wheels with a capacity from 500 L to 1200 L with flat lid(s), for trunnion and/or lifting devices – Dimensions and design
  • AS 4123.3 Mobile waste containers Containers with four wheels with a capacity from 770 L to 1300 L with dome lid(s), for trunnion and/or lifting devices – Dimensions and design
  • AS 4123.4 Mobile waste containers Containers with four wheels with a capacity from 750 L to 1700 L with flat lid(s), for wide trunnion or BG and/or wide comb lifting devices – Dimensions and design
  • AS 4123.5 Mobile waste containers Performance requirements and test methods
  • AS 4145.5 Locksets and hardware for doors and windows Controlled door closing devices (EN 1154:1997, MOD)
  • AS 4256.1 Plastic roof and wall cladding materials – General requirements (JAS-ANZ)
  • AS 4256.2 Plastic roof and wall cladding materials – Unplasticized polyvinyl chloride (uPVC) building sheets (JAS-ANZ)
  • AS 4256.3 Plastic roof and wall cladding materials – Glass fibre reinforced polyester (GRP) (JAS-ANZ)
  • AS 4256.4 Plastic roof and wall cladding materials – Unplasticized polyvinyl chloride (uPVC) wall cladding boards (JAS-ANZ)
  • AS 4256.5 Plastic roof and wall cladding materials – Polycarbonate (JAS-ANZ)
  • AS 4419 Soils for landscaping and garden use
  • AS 4420.0 Windows – Methods of test General introduction and list of methods
  • AS 4454 Composts, soil conditioners and mulches
  • AS 4586 Slip resistance classification for new pedestrian surface material
  • AS 4662 Ceramic tiles – Definitions, classification, characteristics and marking (JAS-ANZ)
  • AS 4785.1 Timber – Softwood – Sawn and milled products – Product specification 
  • AS 4785.2 Timber – Softwood – Sawn and milled products – Grade description
  • AS 5039 Security screen doors and security window grilles (JAS-ANZ)
  • AS 5068 Timber – Finger joints in structural products – Production requirements
  • AS 5082.1 Polybutylene (PB) plumbing pipe systems – Metric series – Metric polybutylene (PB) pipes for hot and cold water applications
  • AS 5082.2 Polybutylene (PB) plumbing pipe systems – Metric series – Mechanical and fusion jointing systems
  • AS 5146.1 Reinforced Autoclaved Aerated Concrete – Structures
  • AS 5146.2 Reinforced Autoclaved Aerated Concrete – Design
  • AS 5146.3 Reinforced Autoclaved Aerated Concrete – Construction
  • AS 6669 Plywood – Formwork (JAS-ANZ)
  • AS/NZS 1328.1 Glued laminated structural timber Performance requirements and minimum production requirements
  • AS/NZS 1163 Cold-formed structural steel hollow sections
  • AS/NZS 1546.1 On-site domestic wastewater treatment units – Septic tanks (JAS-ANZ)
  • AS/NZS 1546.2 On-site domestic wastewater treatment units Waterless composting toilets (JAS-ANZ)
  • AS/NZS 1546.3 On-site domestic wastewater treatment units – Aerated wastewater treatment systems (JAS-ANZ)
  • AS/NZS 1546.4 On-site domestic wastewater treatment units Domestic greywater treatment systems
  • AS/NZS 1571 Copper – Seamless tubes for airconditioning and refrigeration
  • AS/NZS 1576.1 Scaffolding General requirements (JAS-ANZ)
  • AS/NZS 1576.2 Scaffolding Couplers and accessories (JAS-ANZ)
  • AS/NZS 1576.3 Scaffolding Prefabricated and tube-and-coupler scaffolding (JAS-ANZ)
  • AS/NZS 1576.4 Scaffolding Suspended scaffolding (JAS-ANZ)
  • AS/NZS 1576.5 Scaffolding Prefabricated splitheads and trestles (JAS-ANZ)
  • AS/NZS 1576.6 Scaffolding – Metal tube-and-coupler scaffolding – Deemed to comply with AS/NZS 1576.3 (JAS-ANZ)
  • AS/NZS 1577:2013 Scaffold decking components (JAS-ANZ)
  • AS/NZS 1594 Hot-rolled steel flat products
  • AS/NZS 1838 Swimming pools – Premoulded fibre-reinforced plastics – Design and fabrication
  • AS/NZS 1859.1 Reconstituted wood-based panels – Specifications Particleboard (JAS-ANZ)
  • AS/NZS 1859.2 Reconstituted wood-based panels – Specifications Dry-processed Fibreboard (JAS-ANZ)
  • AS/NZS 1859.3 Reconstituted wood-based panels – Specifications Decorative overlaid wood panels (JAS-ANZ)
  • AS/NZS 1859.4 Reconstituted wood-based panels – Specifications Wet-processed Fibreboard (JAS-ANZ)
  • AS/NZS 1860.1 Particleboard Flooring Specification (JAS-ANZ)
  • AS/NZS 2208 Safety glazing materials in buildings (JAS-ANZ)
  • AS/NZS 2269 Plywood – Structural (JAS-ANZ)
  • AS/NZS 2270 Plywood and blockboard for interior use (JAS-ANZ)
  • AS/NZS 2271 Plywood and blockboard for exterior use (JAS-ANZ)
  • AS/NZS 2272 Plywood – Marine (JAS-ANZ)
  • AS/NZS 2343 Bullet-resistant panels and elements (JAS-ANZ)
  • AS/NZS 2425 Bar chairs in reinforced concrete – Product requirements and test methods
  • AS/NZS 2588 Gypsum plasterboard (JAS-ANZ)
  • AS/NZS 2610.2 Spa pools – Private spas
  • AS/NZS 2712 Solar and heat pump water heaters – Design and construction (JAS-ANZ)
  • AS/NZS 2728 Prefinished/prepainted sheet metal products for interior/exterior building applications – Performance requirements
  • AS/NZS 2803.1 Doors – Security screen – Hinged (JAS-ANZ)
  • AS/NZS 2904 Damp-proof courses and flashings (JAS-ANZ)
  • AS/NZS 2908.1 Cellulose-cement products Corrugated sheets (JAS-ANZ)
  • AS/NZS 2908.2 Cellulose-cement products – Flat sheet (JAS-ANZ)
  • AS/NZS 3582.3 Supplementary cementitious materials for use with portland and blended cement – Amorphous silica (JAS-ANZ)
  • AS/NZS 3679.1 Structural steel – Part 1: Hot-rolled bars and sections
  • AS/NZS 3679.2 Structural steel – Part 2: Welded I sections
  • AS/NZS 3678 Structural steel – Hot-rolled plates, floorplates and slabs
  • AS/NZS 4058 Precast concrete pipes (pressure and non-pressure) (JAS-ANZ)
  • AS/NZS 4114.1 Spray painting booths, designated spray painting areas and paint mixing rooms – Design, construction and testing
  • AS/NZS 4114.2 Spray painting booths, designated spray painting areas and paint mixing rooms – Installation and maintenance
  • AS/NZS 4131 Polyethylene (PE) compounds for pressure pipes and fittings (JAS-ANZ)
  • AS/NZS 4256.3 Plastic roof and wall cladding materials – Glass fibre reinforced polyester (GRP)
  • AS/NZS 4256.6 Plastic roof and wall cladding materials – Glass fibre reinforced polyester (GRP)
  • AS/NZS 4357.0 Structural laminated veneer lumber – Specifications (JAS-ANZ)
  • AS/NZS 4389 Roof safety mesh
  • AS/NZS 4422 Playground surfacing – Specifications, requirements and test method (JAS-ANZ)
  • Composts, soil conditioners and mulches
  • AS/NZS 4455.1 Masonry units, pavers, flags and segmental retaining wall units – Masonry units (JAS-ANZ)
  • AS/NZS 4455.3 Masonry units, pavers, flags and segmental retaining wall units – Segmental retaining wall units (JAS-ANZ)
  • AS/NZS 4488.1 Industrial rope access systems Specifications
  • AS/NZS 4505 Garage doors and other large access doors
  • AS/NZS 4666 Insulating glass units
  • AS/NZS 4671 Steel reinforcing materials
  • AS/NZS 4672 Steel prestressing materials – General requirements
  • AS/NZS 4766 Polyethylene storage tanks for water and chemicals (JAS-ANZ)
  • AS/NZS 4858 Wet area membranes (JAS-ANZ)
  • AS/NZS 4859.1 Materials for the thermal insulation of buildings – General criteria and technical provisions (JAS-ANZ)
  • AS/NZS 4999 PVC-U maintenance shafts
  • ASTM C 1048 Standard Specification for Heat-Treated Flat Glass – Kind HS, Kind FT Coated and Uncoated Glass
  • ASTM C 1172 Standard Specification for Laminated Architectural Flat Glass
  • ISO 8336 Fibre-cement flat sheets – Product specification and test methods
  • ISO 21005 Ships and marine technology – Thermally toughened marine safety glass panes for windows and side scuttles
  • NZS 2295 Pliable, permeable building underlays
  • NZS 4211 Specification for performance of windows
  • NZS 4218 Thermal insulation – Housing and small building
  • NZS 4223.1 Code of practice for glazing in buildings – Glass selection and glazing
  • NZS 4223.2 Glazing in buildings – Part 2: Insulating glass units
  • NZS 4223.4 Glazing in buildings – Part 4: Wind, dead, snow, and live actions
  • NZS 4454 Composts, soil conditioners and mulches
  • NZS 8500 Safety barriers and fences around swimming pools, spas and hot tubs

Make an Enquiry / Application

Make an Enquiry

Start the Certification process