Construction
and
Building Materials

Our JAS-ANZ accredited CMI ProdCert Scheme is classed as a Type 5 certification scheme.

This Certification Scheme is our most flexible scheme, covering Australia, New Zealand and many other countries around the globe. Our CMI ProdCert Scheme evaluates products against the requirements of ISO/IEC 17065 and the specific standard(s) such as AS/NZS, AS, NZS, NFPA, ASTM and ISO.

The ISO/IEC 17065 process evaluates products or compliance to national or international standard, based on the supply of test reports from recognised testing laboratorys such as, NATA, IANZ or ILAC approved laboratories and testing facilities, manufacturing site audits, technical documentation, Product Quality Plan (PQP) and on-going annual audits.

JAS-ANZ Accredited

Click the below for list of Construction Standards.

  • ANSI Z97.1 Safety Glazing Materials Used In Buildings – Safety Performance Specifications And Methods Of Test (JAS-ANZ)
  • AS 1056.1 Storage water heaters – General requirements (JAS-ANZ)
  • AS 1056.2 Storage water heaters – Specific requirements for water heaters with single shells (JAS-ANZ)
  • AS 1056.3 Storage water heaters – Specific requirements for water heaters with composite shells (JAS-ANZ)
  • AS 1172.4 Sanitary Plumbing Products Washbasins (JAS-ANZ)
  • AS 1172.5 SANITARY PLUMBING PRODUCTS BATHS FOR ABLUTIONARY PURPOSES(JAS-ANZ)
  • AS 1191 Acoustics – Method For Laboratory Measurement Of Airborne Sound Transmission Insulation Of Building Elements
  • AS 1273 Unplasticized PVC (UPVC) Downpipe and Fittings For Rainwater (JAS-ANZ)
  • AS 1288 Glass in buildings – Selection and installation (JAS-ANZ)
  • AS 1316 Masonry cement (JAS-ANZ)
  • AS 1397 Continuous Hot-Dip Metallic Coated Steel Sheet and Strip – Coatings Of Zinc and Zinc Alloyed With Aluminium and Magnesium (JAS-ANZ)
  • AS 1476 Metric wood screws
  • AS 1530.1 Methods For Fire Tests On Building Materials, Components and Structures Combustibility Test For Materials
  • AS 1530.2 Methods For Fire Tests On Building Materials, Components and Structures Test For Flammability Of Materials
  • AS 1530.4 Methods For Fire Tests On Building Materials, Components and Structures Fire-Resistance Tests For Elements Of Construction
  • AS 1530.7 Methods For Fire Tests On Building Materials, Components and Structures Smoke Control Assemblies – Ambient And Medium Temperature Leakage Test Procedure
  • AS 1530.8.1 Methods For Fire Tests On Building Materials, Components and Structures Tests On Elements Of Construction For Buildings Exposed To Simulated Bushfire Attack – Radiant Heat And Small Flaming Sources
  • AS 1530.8.2 Methods For Fire Tests On Building Materials, Components and Structures Tests On Elements Of Construction For Buildings Exposed To Simulated Bushfire Attack – Large Flaming Sources
  • AS 1562.1 Design and Installation Of Metal Roof And Wall Cladding, Part 1: Metal (JAS-ANZ)
  • AS 1562.3 Design and Installation Of Sheet Roof And Wall Cladding, Part 3: Plastic (JAS-ANZ)
  • AS 1546.3 On-site domestic wastewater treatment units Secondary treatment systems (JAS-ANZ)
  • AS 1546.4 On-site domestic wastewater treatment units Domestic greywater treatment systems (JAS-ANZ)
  • AS 1579 Arc-welded steel pipes and fittings for water and waste-water (JAS-ANZ)
  • AS 1576.3 Scaffolding prefabricated and tube-and-coupler scaffolding (JAS-ANZ)
  • AS 1576.5 Scaffolding prefabricated trestle and trestle ladder scaffolds (JAS-ANZ)
  • AS 1576.7 Scaffolding Safe Use Of Encapsulation On Scaffolding
  • AS 1576.6 Scaffolding metal tube-and-coupler scaffolding – Deemed to conform to AS/NZS 1576.1 (JAS-ANZ)
  • AS 1576.7 (INT) Scaffolding safe use of encapsulation on scaffolding (JAS-ANZ)
  • AS 1597.1 Precast reinforced concrete box culverts small culverts (not exceeding 1200 mm span and 1200 mm height) (JAS-ANZ)
  • AS 1597.2 Precast reinforced concrete box culverts large culverts (exceeding 1200 mm span or 1200 mm height and up to and including 4200 mm span and 4200 mm height) (JAS-ANZ)
  • AS 1657 Fixed platforms, walkways, stairways and ladders – Design, construction and installation (JAS-ANZ)
  • AS 1668.2 The Use Of Ventilation And Airconditioning In Buildings, Part 2: Mechanical Ventilation In Building (JAS-ANZ)
  • AS 1668.4 The Use Of Ventilation And Airconditioning In Buildings, Part 4: Natural Ventilation Of Building (JAS-ANZ)
  • AS 1672.1 Limes and limestones – Limes for building (JAS-ANZ)
  • AS 1682.1 Fire, Smoke and Air Dampers Specification
  • AS 1725.1 Chain link fabric fencing Security fences and gates – General requirements
  • AS 1741 Vitrified clay pipes and fittings with flexible joints – Sewer quality (JAS-ANZ)
  • AS 1735.11 Lifts, escalators and moving walks (known as the SAA Lift Code) – Fire-rated landing doors (JAS-ANZ)
  • AS 1735.12 Lifts, escalators and moving walks, Part 12: Facilities for persons with disabilities (EN 81-70:2018, MOD) (JAS-ANZ)
  • AS 1788.1 Abrasive wheels – Design, construction, and safeguarding (JAS-ANZ)
  • AS 1859.1 Reconstituted wood-based panels – Specifications Particleboard (JAS-ANZ)
  • AS 1905.1 Components for the protection of openings in fire-resistant walls Fire-resistant doorsets (JAS-ANZ)
  • AS 1905.2 Components For The Protection Of Openings In Fire Resistant Walls Fire-Resistant Roller Shutters (JAS-ANZ)
  • AS 1926.1 Swimming Pool Safety, Part 1: Safety Barriers For Swimming Pools (JAS-ANZ)
  • AS 1926.3 Swimming pool safety, Part 3: Water recirculation systems (JAS-ANZ)
  • AS 2047 Windows in buildings – Selection and installation (JAS-ANZ)
  • AS 2049 Roof Tiles (JAS-ANZ)
  • AS 2304 Water Storage Tanks For Fire Protection Systems (JAS-ANZ)
  • AS 2345 Dezincification resistance of copper alloys (JAS-ANZ)
  • AS 2369.1 Materials for solar collectors for swimming pool heating Rubber materials
  • AS 2419.4 Fire Hydrant Installations Storz Fittings For Firefighting Purposes (JAS-ANZ)
  • AS 2537.5 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications plastics pipes and fittings – crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels – metric series – specifications -fittings for mechanical jointing (including PE-X/metal transitions) (ISO 14531-3:2006, MOD) (Reconfirmed 2022) (JAS-ANZ)
  • AS 2665 Smoke/Heat Venting Systems – Design, Installation and Commissioning (JAS-ANZ)
  • AS 2688 Timber doors
  • AS 2689 Timber doorsets
  • AS 2858 Timber – Softwood – Visually stress-graded for structural purposes
  • AS 2870 Residential slabs and footings
  • AS 2941 Fixed fire protection installations – Pumpset systems (JAS-ANZ)
  • AS 3496 Metal-bodied and plastic-bodied taps (JAS-ANZ)
  • AS 3497 DRINKING WATER TREATMENT SYSTEMS – DESIGN AND PERFORMANCE REQUIREMENTS (JAS-ANZ)
  • AS 3498 SAFETY AND PUBLIC HEALTH REQUIREMENTS FOR PLUMBING PRODUCTS – WATER HEATERS AND HOT-WATER STORAGE TANKS (JAS-ANZ)
  • AS 3582.1 Supplementary cementitious materials for use with portland and blended cement – Fly ash (JAS-ANZ)
  • AS 3582.2 Supplementary cementitious materials for use with portland and blended cement – Slag – Ground granulated iron blast-furnace (JAS-ANZ)
  • AS 3582.4 Supplementary Cementitious Materials Pozzolans — Manufactured (JAS-ANZ)
  • AS 3610 Formwork for concrete
  • AS 3634 Solar heating systems for swimming pools
  • AS 3648 Specification and methods of test for packaged concrete mixes (JAS-ANZ)
  • AS 3660.1 Termite management – New building work (JAS-ANZ)
  • AS 3660.2 Termite Management In and Around Existing Buildings And Structures (JAS-ANZ)
  • AS 3660.3 Termite Management, Part 3: Assessment Criteria For Termite Management Systems (JAS-ANZ)
  • AS 3715 Metal finishing – Thermoset powder coating for architectural applications of aluminium and aluminium alloys (JAS-ANZ)
  • AS 3718 WATER SUPPLY – TAP WARE (JAS-ANZ)
  • AS 3795 Copper alloy tubes for plumbing and drainage applications (JAS-ANZ)
  • AS 3850.2 Prefabricated concrete elements Building construction
  • AS 3972 General purpose and blended cements (JAS-ANZ)
  • AS 3959 Construction Of Buildings In Bushfire-Prone Areas (JAS-ANZ)
  • AS 3996 Access covers and grates (JAS-ANZ)
  • AS 4084 Steel storage racking
  • AS 4041 Pressure Piping (JAS-ANZ)
  • AS 4072.1 Components For The Protection Of Openings In Fire-Resistant Separating Elements, Part 1: Service Penetrations And Control Joints (JAS-ANZ)
  • AS 4123.1 Mobile waste containers Containers with two wheels and a capacity up to 400 L for lifting devices – Dimensions and design (JAS-ANZ)
  • AS 4123.2 Mobile waste containers Containers with four wheels with a capacity from 500 L to 1200 L with flat lid(s), for trunnion and/or lifting devices – Dimensions and design (JAS-ANZ)
  • AS 4123.3 Mobile waste containers Containers with four wheels with a capacity from 770 L to 1300 L with dome lid(s), for trunnion and/or lifting devices – Dimensions and design (JAS-ANZ)
  • AS 4123.4 Mobile waste containers Containers with four wheels with a capacity from 750 L to 1700 L with flat lid(s), for wide trunnion or BG and/or wide comb lifting devices – Dimensions and design (JAS-ANZ)
  • AS 4123.5 Mobile waste containers Performance requirements and test methods (JAS-ANZ)
  • AS 4145.1 Locksets and Hardware For Doors And Windows Glossary Of Terms And Rating System (JAS-ANZ)
  • AS 4145.2 Locksets and Hardware For Doors And Windows Mechanical Locksets For Doors and Windows In Buildings (JAS-ANZ)
  • AS 4145.3 Locksets Mechanical Locksets For Windows In Buildings (JAS-ANZ)
  • AS 4145.4 Locksets Padlocks (JAS-ANZ)
  • AS 4145.5 Locksets and hardware for doors and windows Controlled door closing devices (EN 1154:1997, MOD) (JAS-ANZ)
  • AS 4176.1 Multilayer pipes for pressure applications – Multilayer piping systems for hot and cold plumbing applications – General (ISO 21003-1:2008 MOD) (JAS-ANZ)
  • AS 4176.2 Multilayer pipes for pressure applications – Multilayer piping systems for hot and cold plumbing applications – Pipes (ISO 21003-2:2008 MOD) (JAS-ANZ)
  • AS 4176.3 Multilayer pipes for pressure applications – Multilayer piping systems for hot and cold plumbing applications – Fittings (ISO 21003-3:2008 MOD) (JAS-ANZ)
  • AS 4176.8 Multilayer pipes for pressure applications Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) – Specifications for systems (ISO 17484-1:2006, MOD) (JAS-ANZ)
  • AS 4200.1 Pliable Building Membranes and Underlays Materials (JAS-ANZ)
  • AS 4254.1 Ductwork For Air-Handling Systems In Buildings, Part 1: Flexible Duct (JAS-ANZ)
  • AS 4254.2 Ductwork For Air-Handling Systems In Buildings, Part 2: Rigid Duct (JAS-ANZ)
  • AS 4256.1 Plastic roof and wall cladding materials – General requirements (JAS-ANZ)
  • AS 4256.2 Plastic roof and wall cladding materials – Unplasticized polyvinyl chloride (uPVC) building sheets (JAS-ANZ)
  • AS 4256.3 Plastic roof and wall cladding materials – Glass fibre reinforced polyester (GRP) (JAS-ANZ)
  • AS 4256.4 Plastic roof and wall cladding materials – Unplasticized polyvinyl chloride (uPVC) wall cladding boards (JAS-ANZ)
  • AS 4256.5 Plastic roof and wall cladding materials – Polycarbonate (JAS-ANZ)
  • AS 4419 Soils for landscaping and garden use
  • AS 4420.0 Windows – Methods of test General introduction and list of methods
  • AS 4422 Playground Surfacing – Specifications, Requirements and Test Method (JAS-ANZ)
  • AS 4454 Composts, soil conditioners and mulches (JAS-ANZ)
  • AS 4586 Slip resistance classification for new pedestrian surface material (JAS-ANZ)
  • AS 4606 Grade S Fire Resistant and Antistatic Requirements For Conveyor Belting And Conveyor Accessories (JAS-ANZ)
  • AS 4654.1 Waterproofing membranes for external above-ground use Materials (JAS-ANZ)
  • AS 4654.2 Waterproofing membranes for external above-ground use Design and installation
  • AS 4662 Ceramic tiles – Definitions, classification, characteristics and marking (JAS-ANZ)
  • AS 4666 Insulating glass units (JAS-ANZ)
  • AS 4785.1 Timber – Softwood – Sawn and milled products – Product specification
  • AS 4785.2 Timber – Softwood – Sawn and milled products – Grade description
  • AS 4795 Butterfly valves for waterworks purposes (JAS-ANZ)
  • AS 4796 Water supply-Metal-bodied and plastic-bodied ball valves for property service connection (JAS-ANZ)
  • AS 5039 Security screen doors and security window grilles (JAS-ANZ)
  • AS 5068 Timber – Finger joints in structural products – Production requirements
  • AS 5082.1 Polybutylene (PB) plumbing pipe systems – Metric series – Metric polybutylene (PB) pipes for hot and cold water applications
  • AS 5082.2 Polybutylene (PB) plumbing pipe systems – Metric series – Mechanical and fusion jointing systems
  • AS 5113 Classification Of External Walls Of Buildings Based On Reaction-To-Fire Performance
  • AS 5146.1 Reinforced Autoclaved Aerated Concrete – Structures (JAS-ANZ)
  • AS 5146.2 Reinforced Autoclaved Aerated Concrete – Design
  • AS 5146.3 Reinforced Autoclaved Aerated Concrete – Construction
  • AS 5637.1 Determination Of Fire Hazard Properties, Part 1: Wall and Ceiling Linings
  • AS 6401 Knife gate valves for waterworks purposes (JAS-ANZ)
  • AS 6669 Plywood – Formwork (JAS-ANZ)
  • AS 13006 Ceramic Tiles – Definitions, Classification, Characteristics and Marking (JAS-ANZ)
  • AS ISO 717.2 Acoustics – Rating Of Sound Insulation In Buildings and Of Building Elements Impact Sound Insulation
  • AS ISO 9705 Fire Tests – Full-Scale Room Test For Surface Products
  • AS EN 12413 Safety requirements for bonded abrasive products (JAS-ANZ)
  • AS/NZS 1163 Cold-formed structural steel hollow sections
  • AS/NZS 1254 PVC-U pipes and fittings for stormwater and surface water applications (JAS-ANZ)
  • AS/NZS 1328.1 Glued laminated structural timber Performance requirements and minimum production requirements (JAS-ANZ)
  • AS/NZS 1428.4.1 Design For Access And Mobility Means To Assist The Orientation Of People With Vision Impairment – Tactile Ground Surface Indicators (JAS-ANZ)
  • AS/NZS 1530.3 Methods For Fire Tests On Building Materials, Components And Structures Simultaneous Determination Of Ignitability, Flame Propagation, Heat Release And Smoke Release
  • AS/NZS 1546.1 On-site domestic wastewater treatment units – Septic tanks (JAS-ANZ)
  • AS/NZS 1546.2 On-site domestic wastewater treatment units Waterless composting toilets (JAS-ANZ)
  • AS/NZS 1546.3 On-site domestic wastewater treatment units – Aerated wastewater treatment systems (JAS-ANZ)
  • AS/NZS 1546.4 On-site domestic wastewater treatment units Domestic greywater treatment systems
  • AS/NZS 1562.2 Design and Installation Of Sheet Roof And Wall Cladding, Part 2: Corrugated Fibre-Reinforced Cement (JAS-ANZ)
  • AS/NZS 1668.1 The use of ventilation and air conditioning in buildings, Part 1: Fire and smoke control in buildings (JAS-ANZ)
  • AS/NZS 1571 Copper – Seamless tubes for airconditioning and refrigeration
  • AS/NZS 1576.1 Scaffolding General requirements (JAS-ANZ)
  • AS/NZS 1576.2 Scaffolding Couplers and accessories (JAS-ANZ)
  • AS/NZS 1576.3 Scaffolding Prefabricated and tube-and-coupler scaffolding (JAS-ANZ)
  • AS/NZS 1576.4 Scaffolding Suspended scaffolding (JAS-ANZ)
  • AS/NZS 1576.5 Scaffolding Prefabricated splitheads and trestles (JAS-ANZ)
  • AS/NZS 1576.6 Scaffolding – Metal tube-and-coupler scaffolding – Deemed to comply with AS/NZS 1576.3 (JAS-ANZ)
  • AS/NZS 1577 Scaffold decking components (JAS-ANZ)
  • AS/NZS 1594 Hot-rolled steel flat products
  • AS/NZS 1730 Washbasins (JAS-ANZ)
  • AS/NZS 1838 Swimming pools – Premoulded fibre-reinforced plastics – Design and fabrication
  • AS/NZS 1859.1 Reconstituted wood-based panels – Specifications Particleboard (JAS-ANZ)
  • AS/NZS 1859.2 Reconstituted wood-based panels – Specifications Dry-processed Fibreboard (JAS-ANZ)
  • AS/NZS 1859.3 Reconstituted wood-based panels – Specifications Decorative overlaid wood panels (JAS-ANZ)
  • AS/NZS 1859.4 Reconstituted wood-based panels – Specifications Wet-processed Fibreboard (JAS-ANZ)
  • AS/NZS 1860.1 Particleboard Flooring Specification (JAS-ANZ)
  • AS/NZS 2179.1 Specifications For Rainwater Goods, Accessories and Fasteners, Part 1: Metal Shape Or Sheet Rainwater Goods, And Metal Accessories And Fasteners (JAS-ANZ)
  • AS/NZS 2208 Safety glazing materials in buildings (JAS-ANZ)
  • AS/NZS 2269 Plywood – Structural (JAS-ANZ)
  • AS/NZS 2269.0 PLYWOOD – STRUCTURAL SPECIFICATIONS (JAS-ANZ)
  • AS/NZS 2270 Plywood and blockboard for interior use (JAS-ANZ)
  • AS/NZS 2271 Plywood and blockboard for exterior use (JAS-ANZ)
  • AS/NZS 2272 Plywood – Marine (JAS-ANZ)
  • AS/NZS 2293.3 Emergency Lighting and Exit Signs For Buildings Emergency Luminaires And Exit Signs (JAS-ANZ)
  • AS/NZS 2343 Bullet-resistant panels and elements (JAS-ANZ)
  • AS/NZS 2425 Bar chairs in reinforced concrete – Product requirements and test methods
  • AS/NZS 2588 Gypsum plasterboard (JAS-ANZ)
  • AS/NZS 2610.2 Spa pools – Private spas
  • AS/NZS 2699.1 Built-In Components For Masonry Construction – Wall Ties (JAS-ANZ)
  • AS/NZS 2699.2 Built-In Components For Masonry Construction – Connectors And Accessories (JAS-ANZ)
  • AS/NZS 2699.3 Built-In Components For Masonry Construction – Lintels And Shelf Angles (Durability Requirements) (JAS-ANZ)
  • AS/NZS 2712 Solar and heat pump water heaters – Design and construction (JAS-ANZ)
  • AS/NZS 2728 Prefinished/prepainted sheet metal products for interior/exterior building applications – Performance requirements
  • AS/NZS 2803.1 Doors – Security screen – Hinged (JAS-ANZ)
  • AS/NZS 2904 Damp-proof courses and flashings (JAS-ANZ)
  • AS/NZS 2908.1 Cellulose-cement products Corrugated sheets (JAS-ANZ)
  • AS/NZS 2908.2 Cellulose-cement products – Flat sheet (JAS-ANZ)
  • AS/NZS 3497 Drinking water treatment units – Plumbing requirements (JAS-ANZ)
  • AS/NZS 3582.1 Supplementary Cementitious Materials Fly Ash (JAS-ANZ)
  • AS/NZS 3582.3 Supplementary cementitious materials for use with portland and blended cement – Amorphous silica (JAS-ANZ)
  • AS/NZS 3679.1 Structural steel – Part 1: Hot-rolled bars and sections
  • AS/NZS 3679.2 Structural steel – Part 2: Welded I sections
  • AS/NZS 3678 Structural steel – Hot-rolled plates, floorplates and slabs
  • AS/NZS 3718 Water supply – Tap ware (JAS-ANZ)
  • AS/NZS 3845.1 Road Safety Barrier Systems and Devices Road Safety Barrier Systems
  • AS/NZS 4058 Precast concrete pipes (pressure and non-pressure) (JAS-ANZ)
  • AS/NZS 4114.1 Spray painting booths, designated spray painting areas and paint mixing rooms – Design, construction and testing
  • AS/NZS 4114.2 Spray painting booths, designated spray painting areas and paint mixing rooms – Installation and maintenance
  • AS/NZS 4129 Fittings for polyethylene (PE) pipes for pressure applications (JAS-ANZ)
  • AS/NZS 4130 Polyethylene (PE) pipes for pressure applications (JAS-ANZ)
  • AS/NZS 4131 Polyethylene (PE) compounds for pressure pipes and fittings (JAS-ANZ)
  • AS/NZS 4158 Thermal-bonded polymeric coatings on valves and fittings for water industry purposes (JAS-ANZ)
  • AS/NZS 4200.1 Pliable building membranes and underlays – Materials (JAS-ANZ)
  • AS/NZS 4256.3 Plastic roof and wall cladding materials – Glass fibre reinforced polyester (GRP)
  • AS/NZS 4256.6 Plastic roof and wall cladding materials – Glass fibre reinforced polyester (GRP)
  • AS/NZS 4284 Testing Of Building Facades
  • AS/NZS 4357.0 Structural laminated veneer lumber – Specifications (JAS-ANZ)
  • AS/NZS 4389 Roof safety mesh
  • AS/NZS 4422 Playground surfacing – Specifications, requirements and test method (JAS-ANZ)
  • Composts, soil conditioners and mulches
  • AS/NZS 4455.1 Masonry units, pavers, flags and segmental retaining wall units – Masonry units (JAS-ANZ)
  • AS/NZS 4455.2 Masonry Units, Pavers, Flags and Segmental Retaining Wall Units, Part 2: Pavers And Flags (JAS-ANZ)
  • AS/NZS 4455.3 Masonry units, pavers, flags and segmental retaining wall units – Segmental retaining wall units (JAS-ANZ)
  • AS/NZS 4488.1 Industrial rope access systems Specifications (JAS-ANZ)
  • AS/NZS 4505 Garage doors and other large access doors (JAS-ANZ)
  • AS/NZS 4666 Insulating glass units
  • AS/NZS 4671 Steel reinforcing materials
  • AS/NZS 4672 Steel prestressing materials – General requirements
  • AS/NZS 4766 Polyethylene storage tanks for water and chemicals (JAS-ANZ)
  • AS/NZS 4858 Wet area membranes (JAS-ANZ)
  • AS/NZS 4859.1 Materials for the thermal insulation of buildings – General criteria and technical provisions (JAS-ANZ)
  • AS/NZS 4999 PVC-U maintenance shafts
  • AS/NZS 5532 Manufacturing Requirements For Single-Point Anchor Device Used For Harness-Based Work At Height (JAS-ANZ)
  • AS/NZS 61386.21 CONDUIT SYSTEMS FOR CABLE MANAGEMENT PARTICULAR REQUIREMENTS – RIGID CONDUIT SYSTEMS (JAS-ANZ)
  • AS/NZS ISO 717.1 Acoustics – Rating Of Sound Insulation In Buildings and Of Building Elements Airborne Sound Insulation
  • ASTM C 1048 Standard Specification for Heat-Treated Flat Glass – Kind HS, Kind FT Coated and Uncoated Glass
  • ASTM C 1172 Standard Specification for Laminated Architectural Flat Glass
  • ASTM F1281-17 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
  • ASTM F1948-20 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
  • ISO 8336 Fibre-cement flat sheets – Product specification and test methods
  • ISO 21005 Ships and marine technology – Thermally toughened marine safety glass panes for windows and side scuttles (JAS-ANZ)
  • NZS 2295 Pliable, permeable building underlays
  • NZS 4211 Specification for performance of windows (JAS-ANZ)
  • NZS 4218 Thermal insulation – Housing and small building
  • NZS 4223.1 Code of practice for glazing in buildings – Glass selection and glazing
  • NZS 4223.2 Glazing in buildings – Part 2: Insulating glass units (JAS-ANZ)
  • NZS 4223.4 Glazing in buildings – Part 4: Wind, dead, snow, and live actions
  • NZS 4232.2 Performance Criteria For Fire Resisting Enclosures – Part 2: Fire Resisting Glazing Systems (JAS-ANZ)
  • NZS 4454 Composts, soil conditioners and mulches
  • NZS 4510 Fire Hydrant Systems For Buildings (JAS-ANZ)
  • NZS 4520 Fire-Resistant Doorsets
  • NZS 4522 Underground Fire Hydrants
  • NZS 8500 Safety barriers and fences around swimming pools, spas and hot tubs
  • WSA 101 Submersible Pumps For Sewerage Pumping Stations (JAS-ANZ)
  • WSA 109 Industry Standard For Flange Gaskets And O-Rings (JAS-ANZ)
  • WSA 115 Post-Formed Variable Bend PVC Fittings For Non Pressure Pipelines (JAS-ANZ)
  • WSA 129 Plastics Collection Tanks For Pressure And Vacuum Sewers (JAS-ANZ)
  • WSA 130 Iso End Suction Centrifugal Pumps (JAS-ANZ)
  • WSA 131 Iso End Suction Centrifugal Motor Pumps (JAS-ANZ)
  • WSA 137 Industry Standard For Uplasticized Poly(Vinyl Chloride) (PVC-U), Polypropylene (PP) And Polyethylene (PE) Maintenance Shafts, Maintenance Chambers And Maintenance Holes For Sewerage (JAS-ANZ)

Marking of Product Certified Products

Product marking plays a vital role in the Product Certification Scheme, ensuring compliance and promoting safety and quality. Marking products with the appropriate certifications and labels helps consumers make informed choices, distinguishing certified products from others in the market. It provides clear evidence that a product has undergone rigorous testing, manufacturing quality controls and meets established standards. Additionally, product marking aids in traceability, allowing authorities to track and identify certified products throughout the supply chain. By adhering to proper marking practices, manufacturers contribute to building trust, protecting consumers, and upholding the integrity of the Product Certification Scheme, ultimately fostering a safer and more reliable marketplace.

Changes to your product since it was certified

The things you need to let CMI Certification know that may or have changed since your product was originally certified are:

  • Change of Suppliers of any Raw Materials or Components
  • Change to Certified Product Specifications or Design
  • Change of Manufacturing Location
  • Change to Marking, Packaging, User Instructions, Installation Instructions etc
  • Change in Details or Address of Certificate Holder
  • Change to Standard or claims within the Standard

This notification should occur prior to the changes being actually implemented so that CMI Certification can discuss and advise the actions/updates that maybe required to be undertaken because of the change.