Personal Protection Equipment (PPE)
Our JAS-ANZ accredited CMI ProdCert Scheme is classed as a Type 5 certification scheme.
This Certification Scheme is our most flexible scheme, covering Australia, New Zealand and many other countries around the globe. Our CMI ProdCert Scheme evaluates products against the requirements of ISO/IEC 17065 and the specific standard(s) such as AS/NZS, AS, NZS, NFPA, ASTM and ISO.
The ISO/IEC 17065 process evaluates products or compliance to national or international standard, based on the supply of test reports from recognised testing laboratorys such as, NATA, IANZ or ILAC approved laboratories and testing facilities, manufacturing site audits, technical documentation, Product Quality Plan (PQP) and on-going annual audits.
JAS-ANZ Accredited
Click the below for list of PPE Standards
- ANSI Z359.1 The Fall Protection Code
- ANSI Z359.4 Safety Requirements For Assisted-rescue And Self-rescue Systems, Subsystems And Components
- ANSI Z87.1 Eye Safety & Eye Protection Glasses
- AS 1067.1 Eye and face protection – Sunglasses and fashion spectacles Requirements
- AS 1609 Eye protectors for motor cyclists and racing car drivers
- AS 16321.4 (Int) Eye and face protection for occupational use – Part 4: Protection against biological hazards
- AS 17420.2 Respiratory protective devices — Performance requirements, Part 2: Requirements for filtering RPD (ISO 17420-2:2021, (ED.1.0) MOD)
- AS 1891.3 Personal equipment for work at height Manufacturing requirements for fall arrest devices (JAS-ANZ)
- AS 1891.5 Personal equipment for work at height Manufacturing requirements for lanyard assemblies and pole straps (JAS-ANZ)
- AS 1900 Flotation aids for water familiarization and swimming tuition
- AS 2161.6 Occupational protective gloves – Protective gloves for firefighters – Laboratory test methods and performance requirements (JAS-ANZ)
- AS 2210.2 Personal protective equipment Test methods for footwear (JAS-ANZ)
- AS 2210.3 Personal protective equipment Safety footwear (JAS-ANZ)
- AS 2210.3 Personal protective equipment Safety footwear (ISO 20345:2011, MOD)
- AS 2210.5 Personal protective equipment Occupational footwear (JAS-ANZ)
- AS 2210.5 Personal protective equipment Occupational footwear (ISO 20347:2012, MOD)
- AS 2225 Insulating gloves for electrical purposes
- AS 2227 Yachting harnesses and lines – Conventional lines
- AS 3789.2 Textiles for health care facilities and institutions Theatre linen and pre-packs
- AS 3789.3 Textiles For Health Care Facilities and Institutions Apparel For Operating Theatre Staff (JAS-ANZ)
- AS 3789.7 Textiles For Health Care Facilities and Institutions General Apparel (JAS-ANZ)
- AS 4067 Protective helmets for structural firefighting (JAS-ANZ)
- AS 4381 Single use face masks for use in health care (JAS-ANZ)
- AS 4399 Sun Protective Clothing – Evaluation and Classification (JAS-ANZ)
- AS 4602.1 High visibility safety garments – Garments for high risk applications (JAS-ANZ)
- AS 4758.1 Personal flotation devices – General requirements (JAS-ANZ)
- AS 4967 Protective clothing for firefighters – Requirements and test methods for protective clothing used for structural firefighting (JAS-ANZ)
- AS 60903 Live working – Electrical insulating gloves (IEC 60903:2014 (ED. 3.0) MOD) (JAS-ANZ)
- AS ISO 10651.3 Lung ventilators for medical use – Particular requirements for emergency and transport ventilators
- AS ISO 12312.2 Eye and face protection – Sunglasses and related eyewear Filters for direct observation of the sun (JAS-ANZ)
- AS/NZS 1020 The control of undesirable static electricity
- AS/NZS 1270 Acoustics – Hearing protectors (JAS-ANZ)
- AS/NZS 1337 Eye protectors for industrial applications (JAS-ANZ)
- AS/NZS 1337.1 Personal eye protection Eye and face protectors for occupational applications (JAS-ANZ)
- AS/NZS 1337.2 Personal eye protection Mesh eye and face protectors for occupational applications (JAS-ANZ)
- AS/NZS 1337.4 Eye-protection – Filters and eye-protectors against laser radiation (laser eye-protectors) (JAS-ANZ)
- AS/NZS 1337.5 Personal eye-protection – Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) (JAS-ANZ)
- AS/NZS 1337.6 Personal eye protection Prescription eye protectors against low and medium impact (JAS-ANZ)
- AS/NZS 1338.1 Filters for eye protectors – Filters for protection against radiation generated in welding and allied operations (JAS-ANZ)
- AS/NZS 1338.2 Filters for eye protectors Filters for protection against ultraviolet radiation (JAS-ANZ)
- AS/NZS 1338.3 Filters for eye protectors Filters for protection against infra-red radiation (JAS-ANZ)
- AS/NZS 1698 Protective helmets for vehicle users (JAS-ANZ)
- AS/NZS 1716 Respiratory protective devices (JAS-ANZ)
- AS/NZS 17420.1 Respiratory protective devices – Performance requirements General (ISO 17420-1:2021, MOD) (JAS-ANZ)
- AS/NZS 17420.2 Respiratory protective devices – Performance requirements – Requirements for filtering RPD (JAS-ANZ)
- AS/NZS 17420.4 Respiratory protective devices – Performance requirements, Part 4: Requirements for supplied breathable gas RPD (ISO 17420-4:2021, MOD) (JAS-ANZ)
- AS/NZS 17420.6 Respiratory protective devices – Performance requirements, Part 6: Special application escape – Filtering RPD and supplied breathable gas RPD (ISO 17420-6:2021, MOD)
- AS/NZS 17420.7 Respiratory protective devices – Performance requirements, Part 7: Special application marine, mining, welding, and abrasive blasting – Filtering RPD and supplied breathable gas RPD (ISO 17420-7:2021, MOD) (JAS-ANZ)
- AS/NZS 17420.6 Respiratory protective devices – Performance requirements Special application escape – Filtering RPD and supplied breathable gas RPD (ISO 17420-6:2021, MOD) (JAS-ANZ)
- AS/NZS ISO 17420.3 Respiratory Protective Devices – Performance Requirements Thread Connection (JAS-ANZ)
- AS/NZS 1801 Occupational protective helmets (JAS-ANZ)
- AS/NZS 1891.1 Personal equipment for work at height Manufacturing requirements for full body combination and lower body harnesses (JAS-ANZ)
- AS/NZS 1891.2 Industrial fall-arrest systems and devices Horizontal lifeline and rail systems (JAS-ANZ)
- AS/NZS 1891.3 Industrial fall-arrest systems and devices – Fall-arrest devices (JAS-ANZ)
- AS/NZS 1891.4 Industrial Fall-Arrest Systems and Devices Selection, Use and Maintenance
- AS/NZS 1900 Flotation aids for water familiarization and swimming tuition (JAS-ANZ)
- AS/NZS 1906.4 Retroreflective Materials and Devices For Road Traffic Control Purposes – High-Visibility Materials For Safety Garments (JAS-ANZ)
- AS/NZS 2063 Helmets for use on bicycles and wheeled recreational devices
- AS/NZS 2161.2 Occupational protective gloves General requirements
- AS/NZS 2161.3 Occupational protective gloves Protection against mechanical risks.
- AS/NZS 2161.4 Occupational protective gloves Protection against thermal risks (heat and fire)
- AS/NZS 2161.5 Occupational protective gloves Protection against cold
- AS/NZS 2161.6 Occupational protective gloves – Protective gloves for firefighters – Laboratory test methods and performance requirements (JAS-ANZ)
- AS/NZS 2161.7.1 Occupational protective gloves Protection against cuts and stabs by hand knives – Chainmail gloves and arm guards
- AS/NZS 2161.7.2 Occupational protective gloves Protection against cuts and stabs by hand knives – Gloves and arm guards made of material other than chainmail
- AS/NZS 2161.8 Occupational protective gloves Protection against ionizing radiation and radioactive contamination
- AS/NZS 2161.10.1 Occupational protective gloves Protective gloves against chemicals and micro-organisms – Terminology and performance requirements
- AS/NZS 2210.3 Occupational protective footwear – Specifications for safety footwear (JAS-ANZ)
- AS/NZS 2210.4 Occupational protective footwear – Specification for protective footwear (JAS-ANZ)
- AS/NZS 2210.5 Occupational protective footwear – Specification for occupational footwear (JAS-ANZ)
- AS/NZS 3838 Helmets for horse riding and horse-related activities
- AS/NZS 4011.1 Single-use medical examination gloves Specification for gloves made from rubber latex or rubber solution (ISO 11193-1:2008, MOD)
- AS/NZS 4011.2 Single-use medical examination gloves Specification for gloves made from poly(vinyl chloride) (ISO 11193-2:2006, MOD)
- AS/NZS 4067 Firefighters’ helmets (JAS-ANZ)
- AS/NZS 4179 Single-use sterile rubber surgical gloves – Specification (ISO 10282:2014, MOD) (JAS-ANZ)
- AS/NZS 4453.3 Protective clothing for users of hand-held chainsaws Protective legwear (JAS-ANZ)
- AS/NZS 4501.1 Occupational Protective Clothing Guidelines on The Selection, Use, Care and Maintenance Of Protective Clothing (JAS-ANZ)
- AS/NZS 4501.2 Occupational protective clothing General requirements (JAS-ANZ)
- AS/NZS 4543.3 Protective Devices Against Diagnostic Medical X-Radiation Protective Clothing and Protective Devices For Gonads (JAS-ANZ)
- AS/NZS 4602.2 High visibility safety garments – Garments for fire service personnel (JAS-ANZ)
- AS/NZS 4821 Protective footwear for firefighters – Requirements and test methods (JAS-ANZ)
- AS/NZS 4824 Protective clothing for fire fighters, requirements and test methods for protective clothing used for wildland fire fighting (ISO 15384; 2003, MOD) (JAS-ANZ)
- AS/NZS 4824 Protective clothing for firefighters – Laboratory test methods and performance requirements for wildland firefighting clothing (ISO 15384:2018, MOD)
- AS/NZS 4836 Safe working on or near low-voltage electrical installations and equipment (JAS-ANZ)
- AS/NZS 5532 Manufacturing requirements for single-point anchor device used for harness-based work at height
- AS/NZS ISO 2801 Clothing for protection against heat and flame – General recommendations for selection, care and use of protective clothing (JAS-ANZ)
- AS/NZS ISO 6529 Protective clothing – Protection against chemicals – Determination of resistance of protective clothing materials to permeation by liquids and gases
- AS/NZS IEC 60903 Live working – Electrical insulating gloves (JAS-ANZ)
- ASTM F 2412 Standard Test Methods for Foot Protection
- ASTM F 2413 Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear
- ASTM F 2892 Standard Specification for Performance Requirements for Soft Toe Protective Footwear (Non-Safety/Non-Protective Toe)
- ENA NENS 09 National Guideline for the Selection, Use and Maintenance of Personal Protective Equipment for Electrical Arc Hazards
- ISO 11611 Protective clothing for use in welding and allied processes (JAS-ANZ)
- ISO 11612 Protective Clothing – Clothing to Protect Against Heat and Flame – Minimum Performance Requirements
- ISO 11613 Protective clothing for firefighters – Laboratory test methods and performance requirements
- ISO 11999-1 PPE for firefighters – Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 1: General (JAS-ANZ)
- ISO 11999-3 PPE for firefighters – Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 3: Clothing (JAS-ANZ)
- ISO 11999-4 PPE for firefighters – Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 4: Gloves (JAS-ANZ)
- ISO 11999-5 PPE for firefighters – Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 5: Helmets (JAS-ANZ)
- ISO 11999-6 PPE for firefighters – Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 6: Footwear (JAS-ANZ)
- ISO 11999-9 PPE for firefighters – Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 9: Fire hoods (JAS-ANZ)
- ISO 12312-1 Eye and face protection – Sunglasses and related eyewear Part 1: Sunglasses for general use
- ISO 12401 Small craft – Deck safety harness and safety line – Safety requirements and test methods
- ISO 12402-2 Personal flotation devices Part 2: Lifejackets, performance level 275 – Safety requirements (JAS-ANZ)
- ISO 12402-3 Personal flotation devices Part 3: Lifejackets, performance level 150 – Safety requirements (JAS-ANZ)
- ISO 12402-4 Personal flotation devices Part 4: Lifejackets, performance level 100 – Safety requirements (JAS-ANZ)
- ISO 12402-5 Personal flotation devices Part 5: Buoyancy aids (level 50) – Safety requirements (JAS-ANZ)
- ISO 12402-6 Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids – Safety requirements and additional test methods (JAS-ANZ)
- ISO 12402-7 Personal Flotation Devices Part 7: Materials and Components Safety Requirements and Test Methods (JAS-ANZ)
- ISO 12402-8 Personal Flotation Devices Part 8: Accessories Safety Requirements and Test Methods (JAS-ANZ)
- ISO 12402-9 Personal Flotation Devices Part 9: Evaluation (JAS-ANZ)
- ISO 12402-10 Personal Flotation Devices Part 10: Selection and Application Of Personal Flotation Devices And Other Relevant Devices (JAS-ANZ)
- ISO 13688 Protective clothing – General requirements
- ISO 13982-1 Protective clothing for use against solid particulates – Part 1:Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
- ISO 15027-1 Immersion suits Part 1: Constant wear suits, requirements including safety
- ISO 15027-2 Immersion suits Part 2: Abandonment suits, requirements including safety
- ISO 15383 Protective gloves for fire fighters – Laboratory test methods and performance requirements
- ISO 15384 Protective clothing for firefighters Laboratory test methods and performance requirements for wildland firefighting clothing (JAS-ANZ)
- ISO 15538 Protective clothing for firefighters – Laboratory test methods and performance requirements for protective clothing with a reflective outer surface
- ISO 16073 Wildland firefighting personal protective equipment – Requirements and test methods
- ISO 16073-1 Wildland firefighting personal protective equipment — Requirements and test methods — Part 1:General (JAS-ANZ)
- ISO 16073-2 Wildland firefighting personal protective equipment — Requirements and test methods — Part 2:Compatibility (JAS-ANZ)
- ISO 16073-3 Wildland firefighting personal protective equipment — Requirements and test methods — Part 3:Clothing (JAS-ANZ)
- ISO 16073-4 Wildland firefighting personal protective equipment — Requirements and test methods — Part 4:Gloves (JAS-ANZ)
- ISO 16073-5 Wildland firefighting personal protective equipment — Requirements and test methods — Part 5:Helmets (JAS-ANZ)
- ISO 16073-6 Wildland firefighting personal protective equipment — Requirements and test methods — Part 6:Footwear (JAS-ANZ)
- ISO 16073-7 Wildland firefighting personal protective equipment — Requirements and test methods — Part 7:Face and eye protection (JAS-ANZ)
- ISO 16073-8 Wildland firefighting personal protective equipment — Requirements and test methods — Part 8:Hearing (JAS-ANZ)
- ISO 16073-9 Wildland Firefighting Personal Protective Equipment Requirements and Test Methods Part 9: Firehoods (JAS-ANZ)
- ISO 16602 Protective clothing for protection against chemicals – Classification, labelling and performance requirements
- ISO 16321-1 Eye and face protection for occupational use Part 1: General requirements
- ISO 16321-2 Eye and face protection for occupational use Part 2: Additional requirements for protectors used during welding and related techniques
- ISO 16321-3 Eye and face protection for occupational use Part 3: Additional requirements for mesh protectors
- ISO 17420-1 Respiratory Protective Devices Performance Requirements Part 1: General (JAS-ANZ)
- ISO 17420-2 Respiratory protective devices — Performance requirements — Part 2: Requirements for filtering RPD (JAS-ANZ)
- ISO 17420-3 Respiratory protective devices — Performance requirements — Part 3: Thread connection (JAS-ANZ)
- ISO 17420-4 Respiratory protective devices — Performance requirements — Part 4: Requirements for supplied breathable gas RPD (JAS-ANZ)
- ISO 17420-5 Respiratory protective devices — Performance requirements — Part 5: Special application fire and rescue services – Supplied breathable gas RPD and filtering RPD (JAS-ANZ)
- ISO 17420-6 Respiratory protective devices — Performance requirements — Part 6: Special application escape – Filtering RPD and supplied breathable gas RPD (JAS-ANZ)
- ISO 17420-7 Respiratory protective devices — Performance requirements — Part 7: Special application marine, mining, welding, and abrasive blasting – Filtering RPD and supplied breathable gas RPD (JAS-ANZ)
- ISO 17723-1 PPE ensembles for firefighters undertaking hazardous materials response activities – Part 1: Gas-tight, vapour-protective ensembles for emergency response teams (“type 1”)
- ISO 18639-1 PPE ensembles for firefighters undertaking specific rescue activities Part 1: General (JAS-ANZ)
- ISO 18639-3 PPE ensembles for firefighters undertaking specific rescue activities Part 3: Clothing (JAS-ANZ)
- ISO 18639-4 PPE ensembles for firefighters undertaking specific rescue activities Part 4: Gloves (JAS-ANZ)
- ISO 18639-5 PPE ensembles for firefighters undertaking specific rescue activities Part 5: Helmet (JAS-ANZ)
- ISO 18639-6 PPE ensembles for firefighters undertaking specific rescue activities Part 6: Footwear (JAS-ANZ)
- ISO 20345 Personal protective equipment-Safety footwear
- ISO 20346 Personal protective equipment-Protective footwear
- ISO 20347 Personal protective equipment-Occupational footwear
- ISO 20471 High visibility clothing – Test methods and requirements
- ISO 21942 Station uniform for firefighters
- ISO 22488 Ships and marine technology – Shipboard fire-fighters’ outfits (protective clothing, gloves, boots and helmet)
- ISO 22610 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment — Test method to determine the resistance to wet bacterial penetration
- ISO 23269-2 Ships and marine technology – Breathing apparatus for ships Part 2: Self-contained breathing apparatus for shipboard firefighters
- ISO 23616 Cleaning, inspection and repair of firefighters’ personal protective equipment (PPE) (JAS-ANZ)
- ISO 27065 Protective clothing – Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers
- ISO 3873 Industrial safety helmets
- ISO/TS 17420-8 Respiratory Protective Devices Performance Requirements Part 8: Special Application Chemical, Biological, Radiological and Nuclear (CBRN) Filtering and Radiological-Nuclear (RN) Filtering RPD (JAS-ANZ)
- ISO/TS 17420-9 Respiratory Protective Devices. Performance Requirements Special Application Chemical, Biological, Radiological and Nuclear (CBRN) Supplied Breathable RPD (JAS-ANZ)
- NFPA 1851 Standard on Selection, Care, and Maintenance of Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting
- NFPA 1951 Protective Ensembles For Technical Rescue Incidents
- NFPA 1971 Protective Ensemble for Structural Fire Fighting
- NFPA 1977 Protective Clothing Equipment for Wildland Fire Fighting
- NFPA 1983 Life Safety Rope And Equipment For Emergency Services
- NFPA 1992 Liquid Splash-Protective Ensembles And Clothing For Hazardous Materials Emergencies
- NFPA 1994 Protective Ensembles For First Responders To Hazardous Materials Emergencies And Cbrn Terrorism Incidents
- NFPA 1999 Protective Clothing And Ensembles For Emergency Medical Operations
- NFPA 2112 Flame-Resistant Garments For Protection Of Industrial Personnel Against Flash Fire
- NZS 5823 Buoyancy aids and marine safety harnesses and lines
- NZS 8600 All-terrian Vehicle Helmets
- PAS 10 Publicly available specification – Aviation high visibility safety garments (Standards New Zealand) (JAS-ANZ)
Marking of Product Certified Products
Product marking plays a vital role in the Product Certification Scheme, ensuring compliance and promoting safety and quality. Marking products with the appropriate certifications and labels helps consumers make informed choices, distinguishing certified products from others in the market. It provides clear evidence that a product has undergone rigorous testing, manufacturing quality controls and meets established standards. Additionally, product marking aids in traceability, allowing authorities to track and identify certified products throughout the supply chain. By adhering to proper marking practices, manufacturers contribute to building trust, protecting consumers, and upholding the integrity of the Product Certification Scheme, ultimately fostering a safer and more reliable marketplace.
Changes to your product since it was certified
The things you need to let CMI Certification know that may or have changed since your product was originally certified are:
- Change of Suppliers of any Raw Materials or Components
- Change to Certified Product Specifications or Design
- Change of Manufacturing Location
- Change to Marking, Packaging, User Instructions, Installation Instructions etc
- Change in Details or Address of Certificate Holder
- Change to Standard or claims within the Standard
This notification should occur prior to the changes being actually implemented so that CMI Certification can discuss and advise the actions/updates that maybe required to be undertaken because of the change.