The following notification has been provided by the Australian Building Codes Board (ABCB) to assist in preparing the market for the introduction of the National Construction Code (NCC) 2019. Further information can be found at;
Changes being introduced in NCC 2019 are almost here. As seen in the public comment draft released last year, there’s lots to take in! Read on to find out more about key changes, dates and what’s available to help you understand it.
Quantifying many of the NCC Performance Requirements to provide more performance-based compliance options is a key feature of NCC 2019. You’ll see more Performance Requirements quantified with the introduction of 20 new Verification Methods (VMs).
The ABCB’s readability project aims to improve the NCC requirements to be more readily understood. Introducing consistent NCC Governing Requirements is the first step of this major piece of work with all three Volumes of the NCC having the same requirements from 2019. Significant changes have also been made to the structure of NCC Volume Three, the Plumbing Code of Australia.
NCC Volumes One and Two
New VM for construction in bushfire-prone areas.
Health and amenity
New condensation management provisions.
New VMs for access to and from a building and for ramps.
New heating and cooling load limits for residential buildings using the NatHERS DTS compliance pathway.
NCC Volume One only
New DTS Provisions for fire sprinkler systems, for apartment buildings and other residential buildings (i.e. Class 2 and 3 buildings) 4 storeys and above and up to 25 metres in effective height (generally those buildings 4 to 8 storeys).
Occupiable outdoor areas
New DTS Provisions clarifying requirements for occupiable outdoor areas, such as roof-top bars and cinemas.
Fire safety VM
A new, non-mandatory VM for fire safety introduced (NCC Schedule 7). This VM can be used for developing a Performance Solution for up to 24 Performance Requirements. Its adoption will be delayed until 1 May 2020 to allow time for training and support.
The commercial building energy efficiency requirements (i.e. Section J) are significantly changed, including new VMs for NABERS and Green Star. This change is subject to a 1 year transition period from 1 May 2019, during which time, either the NCC 2016 or NCC 2019 requirements may be used.
Accessible adult change facilities (AACF)
AACFs are sanitary facilities with additional features to assist people with more profound or complex disabilities who are unable to independently use standard accessible facilities. New requirements mean these facilities are required in certain new or redeveloped public buildings such as shopping centres, museums, theatres, sporting venues and airports.
NCC Volume Two only
New and improved acceptable construction practices (ACPs), including new ACPs for masonry and attachment of decks and balconies and improved ACPs for roof and wall cladding and fire safety.
NCC Volume Three only
New and consolidated requirements for heated water temperature control, cross-connection control and rainwater harvesting and use.
NCC 2019 Key Dates
|Preview released||NCC 2019 adopted||Energy efficiency transition ends||FSVM adopted|
|February 2019||1 May 2019||1 May 2020||1 May 2020|